產品簡介：
①采用進口直線方型導軌，雙排四列滾珠滑塊,承重力大,運行平穩,精度高,壽命長.進口滾珠絲杠精度高，下刀精確。
②完全脫離計算機可遠程操作的USB接口式DSP操作系統，手柄式操作，操作更簡單，設計更具人性化，采用獨特的智能預算法則，充分發揮電機潛能，實現高速加工,曲直線同步,曲線更完美,不占電腦內存并可實現切削主軸的自動起停。
③軟件兼容性好，可兼容type3/Artcam/Castmate/文泰等多種CAD/CAM設計制作軟件。
④六分區真空吸附臺面，可有效針對不同大小板材進行吸附。
⑤采用高速驅動步進電機與驅動器，Y軸采用了雙電機驅動，使之高速運行可達25米以上的空行速度，配合大力切割主軸可使雕刻速度更為提高。
Italy Well-known air cooling spindle,high precision,long life time,steady working,easy to start up.
Thicken square pipe structrue,well welded,no distortion for whole structure.
Adopt imported square orbit,double slippers.Bearring heavy,working steadily,high precision,and long life time.
DSP controller system with USB interface,working without connecting with computer during wotking and easy to control.
Software:CAD/DAM designing software eg Type3/ArtCAM/Castmate/Wenta ect.
Vacuum Table with 6 vacuum zones,which can adsorb different sizes materials.Options for vacuum pump:vacuum pump made in China or No-oil vacuum pump made in Germany.
Auto Oilliung system.Easy to operate by pressing one key.
Adopt high speed stepper motor and drivers,and two motors for Y axis,Max speed is 25m/min.
Auto Aligning System.
Seperated control system makes operation easily.
option:Ratery Clamp to engrave on Columns.Max is dia 36cm and length 10cm.
技術參數
X、Y軸行程 X Y working area 1300×2500mm
Z軸行程 Z working area 200mm
平臺尺寸 Table size 1480×3000mm
最高行進速度 Max feeding ＞25m/min
裝夾形式 Work-holding 真空吸附 by suction
處理器 Processor DSP/主頻 100MHZ
接口界面 Interface USB
雕刻指令 command G代碼＊.uOO*mmg*.plt
軟件運行環境 Surroundings for software DSP
功率（不含主軸） Power(not onduct the spindle) 1840W
工作電壓 Power 380V 50Hz
主軸功率 Main axle power rate 4.5/6Kw(國產水冷）
主軸轉速 Main axle rotating speed 0-24000rpm/min
工作方式 Work Mode 步進Steper