BF-300A曲面包覆機（刮膠）熱融膠施膠工作站
設備用途及功能
本機采用刮涂方式使用油性包覆膠將PVC膜、浸漆紙等貼覆于各種踢腳線、門窗套線、樓梯扶手、塑鋼門窗、鋁型材、木塑等各種線條的表面，一次完成表面、側面、底邊的貼覆。適合復雜線形的包覆。
Function:
Through scale gluing ,this machine works with oil-solution glue to paste PVC and melamine paper on various kick boards, set lines of doors and windows, the railing of the stairs, aluminum materials and plasticwood etc. The wrapping of surface, sides and bottom are accomplished effectively in a single process. This machine is also fit for wrapping complicated lines and surfaces. 設備特性及主要配置
1、涂膠方式采用刮膠方式，可將油性膠均勻的刮涂在PVC膜的表面。
2、底輪、壓輪均為鋁基硅橡膠輪，耐磨性好，不粘膠，使用壽命長。
3、傳動設計采用齒輪結構，運行平穩可靠。
4、卷紙機構用氣漲軸設計制造，調整使用方便靈活。
5、包覆速度手動無級調節，可在較大的范圍內調整。
6、預留基材工作站及熱融膠施膠站接口，可方便設備升級改造。
Features and Main installation:
1. The oil-solution glue can be even scaled on the surface of PVC.
2. The bottom wheels and the pressing wheels are all made by silicon rubber and aluminum. They are wearable and not sticky to the glue. 3. The transmission system adopts the gear structure, which is safe and reliable.
4. The paper-rolling system is made by air-expanded spindle，it is convenient and flexible to use and regulate.
5. The wrapping speed is stepless manual-regulated, so it can regulate in a large scale.
6. The interfaces for the timber workstation and the melted glue is prearrangement, which is convenient for the improvement.
技術參數（Technical Specifications）：
外形尺寸（Exterior size）： 4500mm×640mm×2100mm
涂膠方式（Way of gluing）： 刮涂油性包覆膠（Scale the oil-solution glue）
涂膠寬度（Width of gule）： 300mm
最大加工高度(Maximum height of the work piece)：80mm
加工長度(Maximum length of the work piece)： 400mm~無限（Unlimit）
送料速度(Speed of working)： 2~80m/Min
總功率(Generl Power)： 8kW
整機重量(Weight)： 1.8T

熱融膠施膠工作站
專利設計，預留通用終端接口，可快速方便地與冷膠包覆機對接，拓展使用功能，實現對實木單板的包覆。
也可與本公司生產的通用包覆機機身快速對接，用一個施膠站與多個機身互相轉換，減少不同線型的線條的布輪時間，提高工作效率。
Hot melt glue workstation:
Patent design, the general terminal interface is prearrangement,it can fast join with the cold glue wrapping machine so as to extend to wrap single piece of real wood.
It can also join with the general wrapping machine. So more than one engine can be exchanged to connect with one glue workstation,which can save the time of laying wheels and to work with high efficiency.